Noryl® Sheets

Noryl® Rods

Noryl® GFN3 Rods

Contact Kmac Plastics

Domestic Selling Policy

Privacy

Steel Rods, Bars, Sheets and Tubes

Square Watermelon Cases

Square Watermelon Growing Cases

Hoses

Tapes - Skived, PSI Sensitive, 1 side - 2 Sided

Tygon Tubing

 

Plugs and Caps

Felt Discs, Sheets, Strips

Sheet Metal Screws

Tapping Screws

 

 

Component    Wt. %
C 0.38 - 0.43
Cr 0.8 - 1.1
Fe 96.785 - 97.84
Mn 0.7 - 1
Mo 0.15 - 0.25
P Max 0.035
S Max 0.04
Si 0.15 - 0.3
Physical Properties Metric English Comments
Density 7.85 g/cc 0.284 lb/in³  

Mechanical Properties
Hardness, Brinell 277 277  
Hardness, Knoop 302 302  Converted from Brinell hardness.
Hardness, Rockwell B 99 99  Converted from Brinell hardness.
Hardness, Rockwell C 28 28  Converted from Brinell hardness.
Hardness, Vickers 292 292  Converted from Brinell hardness.
Tensile Strength, Ultimate 883 MPa 128000 psi  
Tensile Strength, Yield 685 MPa 99400 psi  
Elongation at Break 19.2 % 19.2 %  in 50 mm
Reduction of Area 60.4 % 60.4 %  
Modulus of Elasticity 205 GPa 29700 ksi  Typical for steel
Bulk Modulus 140 GPa 20300 ksi  Typical for steel.
Poisson's Ratio 0.29 0.29  Calculated
Machinability 65 % 65 %  Based on AISI 1212 as 100% machinability.
Shear Modulus 80 GPa 11600 ksi  Typical for steel.

Electrical Properties
Electrical Resistivity 2.2e-005 ohm-cm 2.2e-005 ohm-cm  specimen hardened and tempered; 20°C (68°F)
Electrical Resistivity at Elevated Temperature 2.63e-005 ohm-cm 2.63e-005 ohm-cm  specimen hardened and tempered; 100°C (212°F)
Electrical Resistivity at Elevated Temperature 3.26e-005 ohm-cm 3.26e-005 ohm-cm  specimen hardened and tempered; 200°C (390°F)
Electrical Resistivity at Elevated Temperature 4.75e-005 ohm-cm 4.75e-005 ohm-cm  specimen hardened and tempered; 400°C (750°F)
Electrical Resistivity at Elevated Temperature 6.46e-005 ohm-cm 6.46e-005 ohm-cm  specimen hardened and tempered; 600°C (1110°F)

Thermal Properties
CTE, linear 20°C 12.2 µm/m-°C 6.78 µin/in-°F  0-100°C (32-212°F)
CTE, linear 250°C 13.7 µm/m-°C 7.61 µin/in-°F  20-400°C (68-750°F)
CTE, linear 500°C 14.6 µm/m-°C 8.11 µin/in-°F  20-600°C (68-1110°F)
Specific Heat Capacity at Elevated Temperature 0.473 J/g-°C 0.113 BTU/lb-°F  150-200°C
Specific Heat Capacity at Elevated Temperature 0.519 J/g-°C 0.124 BTU/lb-°F  350-400°C
Specific Heat Capacity at Elevated Temperature 0.561 J/g-°C 0.134 BTU/lb-°F  550-600°C
Thermal Conductivity 42.6 W/m-K 296 BTU-in/hr-ft²-°F  100°C
Thermal Conductivity at Elevated Temperature 33 W/m-K 229 BTU-in/hr-ft²-°F  600°C
Thermal Conductivity at Elevated Temperature 37.7 W/m-K 262 BTU-in/hr-ft²-°F  400°C
Thermal Conductivity at Elevated Temperature 42.2 W/m-K 293 BTU-in/hr-ft²-°F  200°C
 

Eyebolts

Threaded Rods

Threaded Rods

Springs

Springs

Carriage Bolts

Dowel Pins

Lag Screws

Self Drilling Screws

Spring Pins

Taper Pins

Set Screws

Drill Bits

Wood Screws

Machine Screws

 

K-Mac Plastics  3821 Clay Ave, SW Wyoming, MI  49548   Contact Kmac Plastics

Goods and services provided by K-mac Plastics (MI, USA).
Sold by 2CheckOut.com Inc. (Ohio, USA).

Acrylic Sheets, Rods, Tubes

Abs Sheets and Rods

Acetal POM Sheets, Rods and Tubes

Nylon Polyamide Sheets, Rods and Tubing

Polypropylene Plastic Sheets, Rods and Tubes

Pbt Sheets, Rods and Tubes

Tpe Santoprene Tubing, Sheets and Rods

Polycarbonate Plastic Sheets, Rods and Tubes Micarta Sheets, Rods, Tubes Pinewood Derby Cars UHMW Sheets Plexiglas Sheets Colored Acrylic Rods and Tubes Polycarbonate Tubes
GLTLA - Texas Longhorns Eyebolts Threaded Rods Circuit Breakers